Filtration Solutions
Filtration Solutions

Gas Liquid Separation


...

Eaton Gas Liquid Separators remove up to 99% of all damage causing moisture and solid particles larger than 10 microns.

Typically installed following an intercooler or aftercooler, the separators are used to remove entrained moisture that would otherwise cause damage in successive stages of compression or to subsequent processes. They're ideal for entrainment removal in primary air lines leading to air-using equipment such as air chucks, air nozzles, and paint spray equipment.

Separators are often installed ahead of steam turbines to protect the turbine blades from the erosive action of wet steam, pipe scale, and other damage-causing entrained solids. They're also installed in steam distribution lines to assure clean, dry steam enters heat exchangers, pressure reducing valves, temperature regulators, meters, and other process equipment.

...

Eaton in-line gas/liquid separators are compact, easy to install and can are supported by the pipeline. Custom fabricated models are available to meet exact requirements of applications with unique piping requirements.

...

The Eaton Type 30L Gas Liquid Separator series can be installed horizontally or vertically for down flow applications.

...

The Eaton Type TS, formerly Wright Austin, with its cost effective design, is the vertical separator of choice for most applications that require clean, dry air, gas, or steam.

...

The Eaton Type T, formerly Wright Austin, with its cost effective design, is the fabricated separator of choice for most applications that require clean, dry air, gas, or steam. Eaton custom manufacturers gas/liquid fabricated separators to meet exact requirements of special applications.

...

For more specialized applications the Eaton Type T Gas/Liquid Separator, formerly Wright Austin, is available as the Type ST with an integral trap as part of its design. The trap mechanism is a fool-proof design which automatically ejects the condensate, without loss of line pressure, when it reaches a predetermined level. The Type ST is compact, easily installed and can be supported by the line.

Eaton’s basic Type T Gas Liquid Separator’s straightforward design fits most applications. For more specialized applications the Type ST is designed with an integral drain trap to eject condensate without loss of line pressure.

...

Eaton’s Type 31 L-ST Gas/Liquid Separators, formerly Wright Austin, automatically remove 99% of all liquid and solid entrainment particles 10 microns in size or larger from air, gas, and steam processes. This compact horizontal separator is supported by the line and takes up little space.

...

Eaton two-stage gas/liquid separators are for applications requiring extremely fine entrainment removal. The first stage is a centrifugal separator that removes slugs and heavy liquid loads. The second stage uses coalescing filters to remove nearly all remaining droplets plus particles as small as 0.3 microns from air, gas and steam processes.

...

Designed for liquid slugs or heavy liquid loads, the Eaton standard size Type 10-R Series gas liquid separators, formerly Wright Austin, can be provided with a large reservoir to meet liquid holdup requirements. Eaton provides a compact gas liquid separator model for applications where space is restricted.

...

The two-stage Eaton Type TF Gas/Liquid Separator/Filter, formerly Wright Austin, is for applications requiring extremely fine entrainment removal. The first stage is a centrifugal separator that removes slugs and heavy liquid loads. The second stage uses coalescing filters to remove nearly all remaining droplets plus particles as small as 0.3 microns from air, gas and steam processes. The most common application for the TF Series Filter/Separator is for natural gas but it is also suitable for any application requiring highly pure output.

...

The two-stage Eaton Type 31-LSF Gas/Liquid Separator/Filter, formerly Wright Austin, is for applications requiring extremely fine entrainment removal. The first stage is a centrifugal separator that removes slugs and heavy liquid loads. The second stage uses coalescing filters to remove nearly all remaining droplets plus particles as small as 0.3 microns from air, gas and steam processes. The most common application for the LSF Series Filter/Separator is for natural gas but it is also suitable for any application requiring highly pure

...

Eaton Type 40 Exhaust Heads are designed to separate entrained water and oil from exhaust air, gas or steam prior to being discharged directly into the atmosphere. They will remove up to 99% of liquids and solids over 10 microns in size from the discharged flow, reducing maintenance costs on roofs and surrounding objects.

...

Eaton Float Drain Traps, formerly Wright Austin, are available in a variety of models and materials of construction, featuring the Model 90-AC, Model 95-AC, Model 230-AC and Model 350-AC.

...

The Eaton Coalescer Separator is a two-stage vessel designed for separation of liquid in the form of a fine mist or fog from a gas or vapor. It’s primarily used in processes involving cooling or condensation, flashing or evaporation applications.

...

Eaton Dry Type Gas/Liquid Separators, formerly Wright Austin, have been designed for applications with a higher than normal load of entrained solids and are available in three different configurations. A straight-through flow connection, a vertical down-flow inlet and a horizontal outlet, and a compact, straight-through flow design.

...

Eaton internal gas liquid separators, formerly Wright Austin, are designed for installation inside receivers, steam drums, and other vessels. Carbon and steel construction for both up flow and down flow applications.